Welcome to visit BoZhong (Shandong) Industrial Equipment Co., Ltd. official website!
‹
›
‹
›
JZJLG series Roots screw vacuum unit
Summary:
JZJLG Roots series screw dry vacuum pump unit is consists of ZJ type roots pump as the main pump, screw vacuum pump as a fore pump is composed of dry without oil vacuum unit. JZJLG Roots series screw dry vacuum pump unit than single screw vacuum pump is more suitable to work under low pressure, such as a vacuum distillation process to pumping rate 150L / s, work pressure is 2000Pa, choose JZJLG150-2 vacuum unit (10.5kw), than the selection of single 180 screw vacuum pump (22KW) more energy-saving and the unit can reach the lower limit pressure.
As the main pump and the former pump are used to dry pump JZJLG, so Roots series vacuum screw dry pump vacuum unit with the following main features:
l The pump cavity has no oil, no pollution of the pumping system, can achieve clean vacuum.
l The pump cavity has no oil, very easy to achieve solvent recovery.
l Roots pump cavity all the nickel plating layer processing, screw pump cavity of the nickel plating and PTFE processing, smoke removing water vapor, solvent gas and other corrosive medium.
l Because no oil in the work process, wastewater discharge, no pollution to the environment.
l The requirements for cooling water pump for low cooling circulating water can meet the requirements of the ordinary, and the cooling water is small.
The primary pump adopts the company self-developed ZJ Roots series vacuum pump, our company will pump cavity and the bearing cavity sealing was improved after the ZJ Roots series vacuum pump in the pumping process of a large number of water vapor and various solvents oil pump is not easy to be emulsified.
Pre stage pump adopts the company self-developed screw vacuum pump, stable and reliable operation, because between the pump chamber and a gear chamber adopts mechanical seal, screw vacuum pump in not filled with nitrogen protection can still stable.
Model representation method
Example：J Z J L G 1 5 0 － 2
J-denotes the first letter of the unit.
ZJ-denotes the main pump is ZJ series Roots series vacuum pump
150–denotes main pump (Roots pump) pumping speed L/s
2 - denotes pumping speed ratio code (that is, pumping speed ratio of the main pump and the former pump is 2)
Screw pumps JZJLG series unit specification:
Explanation:
1. The above table is recommended standard series, due to the different work conditions in actual production application, inhalation of gas and pressure will change a lot, so in the selection should be according to the actual pumping process, gas release process, condensable gas condensation, suction pressure change, check calculation or with reference to the existing equipment selection.
2.Single pump technical indicators refer to the pump parameters table.
3.Maximum suction pressure is the main pump can start the maximum pressure, such as a long time higher than the pressure to run, will cause the main pump overload.
4.Please specify the technical requirements of the gas extraction medium, working pressure, and the explosion proof and other technical requirements.
Application Site of Vacuum Screw Pump
Leave a Reply
Your email address will not be published. Required fields are marked *
Related Recommendations
2BV series liquid ring vacuum pump
2BV series liquid ring vacuum pump2BV series water ring vacuum pumps are suitable for pumping the gases and steam. Its suction pressure can reach 33mbar (abs) (i.e. 97 % vacuum degree). When the liquid ring vacuum pumps work under the condition near the limited vacuum for a long time, it is necessary to couple with the cavitation protection pipe in order to get rid of the screaming and protect the pump. If used as a compressor, its pressure is up to 0.26MPa (absolute pressure). 2BV series water ring vacuum pumps and compressors will replace the SK and 2SK series water ring pumps and the W, WY, WL series reciprocated vacuum pumps completely with their superior performance and advantages.
2BE1 series liquid ring vacuum pump2BE1 series liquid ring vacuum pump2BE1 series water ring vacuum pumps and compressors are the products with high efficiency and economic power, which are manufactured by our company integrating with the advanced technology of the imported products from Germany.
2BE3 series liquid ring vacuum pumps and compressors2BE3 series liquid ring vacuum pumps and compressors2BE3 series water ring vacuum pumps and compressors are designed and manufactured by our company integrating with the advanced technology abroad. They not only can save energy, but also can work constantly for a long time.
2BW series liquid ring vacuum pump closed loop system2BW series liquid ring vacuum pump closed loop systemThe water ring vacuum pumps are used widely in chemical and pharmacy areas for its characteristics of the work principle and structure. Normally, the operating liquid of the water ring vacuum pumps is almost discharged out directly or drained into the large circulation pool, as Figure 1.
ZJ series roots vacuum pumpsZJ series roots vacuum pumpsThe Roots vacuum pump is also known as the mechanical booster which is a positive displacement type pump. It is one of the special pumps which can reach middle, high vacuum range. Its work principle is similar to the Root fan. Both of them used a pair of rotors, whose shape looks like 8, to achieve the suction and discharge process“Please refer to Work Principle of the Roots Pump.”
ZJQ series roots air-cooled vacuum pumpZJQ series roots air-cooled vacuum pumpZJQ Series air-cooling roots vacuum pump is in ZJ Roots series vacuum pump based on the increased bypass gas cooling system is designed. Because of its special structural design, make its can run reliably for a long time under the high pressure.
JZJ2B series roots water ring vacuum unit 2-2JZJ2B series roots water ring vacuum unit 2-2JZJ2B Roots series water ring unit is consists of ZJ type roots pump as the main pump,2BV/2BE1 series of water ring pump or Roots--water ring unit as a fore pump pumping unit. It can be used to pumping gas in addition to, can also aspirate containing water, compared to organic solvent or a small amount of dust gas.
MVR evaporation systemMVR evaporation systemMVR evaporator is the abbreviation of Mechanical Vapor Recompression. MVR re-uses the secondary steam energy produced by its own, thereby reducing the demand for external energy. Early in the 1960s, Germany and France have successfully applied this technology in chemical, pharmaceutical, paper, sewage treatment, seawater desalination and other industries.
PRODUCTS
Leave a Reply
Your email address will not be published. Required fields are marked *